Free partial discharge frequency converter.
Ang libreng partial discharge frequency converter ay angkop para sa inductive pressure-resistant test, lokal na discharge test at series resonant test. Sa paghihiwalay ng pagpapalakas ng mga transformer, reactor, bureau putter, atbp. Upang bumuo ng boltahe na standing test system.
Ang libreng partial discharge frequency converter ay nagpapatupad ng prinsipyo ng linear power amplification upang i-convert ang standard sine wave signal ng variable frequency sa isang high-power test power supply, ang waveform distortion ay maliit, at ang lokal na discharge ay mas mababa sa 10pc upang matugunan ang mga pangangailangan ng Lokal na bahagyang discharge boltahe stand test.
Ang libreng partial discharge frequency converter ay maliit sa laki at liwanag sa timbang, at maaaring ilipat, na angkop para sa paggamit ng field.
Ang supply ng kuryente ay may maraming mga panukala sa proteksyon tulad ng kakulangan ng proteksyon sa yugto, sa ilalim ng proteksyon ng boltahe, proteksyon sa overvoltage, proteksyon sa temperatura, proteksyon ng maikling circuit, proteksyon ng overcurrent, proteksyon ng kuryente at iba pa. Kapag ang alinman sa mga proteksiyon na pagkilos, agad na binabawasan ng power supply ang output boltahe sa 0 at idiskonekta ang pangunahing supply ng kapangyarihan ng circuit sa parehong oras, tinitiyak ang kaligtasan ng pagsubok.
Ang controller at ang seksyon ng supply ng kuryente ay konektado sa pamamagitan ng fiber optic upang matiyak na ang mga gumagamit ay ganap na nakahiwalay mula sa mataas na boltahe.
Piliin ang fan at ang init lababo na may isang malaking thermal area, at gumamit ng isang makatwirang disenyo ng air duct upang matiyak na ang kapangyarihan supply sa rated kapangyarihan para sa isang mahabang panahon.
MGA TAMPOK.
1. Para sa boltahe transpormer induction boltahe stand test at bahagyang pagsubok discharge.
2. Para sa kapangyarihan transpormer induction boltahe stand test at bahagyang pagsubok discharge.
3. Bilang isang supply ng kapangyarihan para sa serye resonant test kagamitan, ito ay ginagamit para sa boltahe stand test at bahagyang pagsubok discharge para sa mataas na boltahe kagamitan tulad ng circuit breaker, gis, boltahe transpormer, kasalukuyang transpormer, bushing, kapangyarihan cable at iba pa.
4. Sa pindutan ng pagsisimula at stop, kapag ang boost circuit ay lilitaw abnormal, pindutin ang pindutan ng stop, ang sistema kaagad pabalik sa zero, putulin ang pangunahing circuit, pinoprotektahan ang kaligtasan ng test person at ang nasubok na aparato.
5. Ang variable frequency power supply ay may manu-manong mode, manual boost, awtomatikong tuning,
Main Spec.:
model
|
331000
|
332500
|
334000
|
336000
|
338000
|
331600
|
Capacity(KVA)
|
100
|
250
|
400
|
600
|
800
|
1600
|
Input
|
Voltage
|
400V±15% 3phase 4wires or 3phase 5wires
|
Frequency
|
45-65Hz
|
Power Factor
|
≥0.90
|
Output
|
Voltage
|
0-690Vac
|
Frequency
|
20-300Hz
|
Frequency Stability
|
≤0.01%(0-100% when load are changing, output
frequency are not changing )
|
Partial discharge
|
≤10pc
|
Load Stability
|
≤3%(100% pure resistance load)
|
Overload Ability
|
110% 1hour ,150% 10minutes
|
Wave Distortion
|
Pure sine wave,THD≤3%
|
Efficiency
|
≥90%(100% loads)
|
Display
|
Input/output voltage/ frequency,3phase
phase voltage/current,active power .working time.history error etc.
|
Control mode
|
IGBT/SPWM Pulse width adjustment mode
|
Protection Class
|
IP20
|
Insulation Reactance
|
>2MΩ
|
Pressure endurance Insulation
|
1800Vac/5Ma/1minute
|
Noise Level
|
50dBA @1meter
|
Cooling Model
|
Converter:heat pipe cooling transformer:Compulsive fan cooling
|
Protection Function
|
The output power supply have perfect
protection function of over voltage, over current, short circuit, converter
overheat . Consider the different control of the ship's electricity load,
when the output load capacity reach the set value,will alarm, so as to
control the electricity load
|
Environment
|
-10℃~+50℃ and 0~90%
|
Indoor Dimension (W×L×H)mm
|
1450*850*1880
|
1910*1160*1880
|
3100*830*2260
|
4100*830*2260
|